Chilles Posted June 24, 2016 Share Posted June 24, 2016 It's really a bit strange for me but: with DellStudio 1747 i7QuadCore CPU & ATI Mobility Radeon HD 4650 is the performance similar like 3DXChat 1. (CheckBox for Simple Water wasn't needed).With Extreme High I've a lot lags and for now I use High as setting and it works fine With the low-end Laptop HP Pavilion TX2590eo AMD Turion tm x2 Ultra Dual Core Mobile ZM-80 2,10GHz CPU3GB RamATI Radeon HD 3200 Graphics is the performance similar like 3DXChat 1 but it looks a lot better (CheckBox for Simple Water wasn't needed) But with the SurfacePro3 DualCore i7 with 2,3GHz, 8GB of Ram and Intel Graphics HD 5000 (CheckBox for Simple Water was needed)The game is nearly unplayable!!! I've now the same Graphic Settings like the 15years old HP Pavilion TX but with more lags With 3DXChat 1. I've no problem and play the game with Extrem High Graphics RiviPiassa and Gizmo 2 Link to comment Share on other sites More sharing options...
Rollo Posted June 24, 2016 Share Posted June 24, 2016 The Room #2 has a very loud echo sound when receiving PMs. Footsteps also a bit too echoey. Ahhh .. Yes! Also noticed that ... was a bit .... disturbing or better ... "distracting" ... also @:Nikki Posted Today, 02:29 PMI am not sure if its a bug or intended... But the skin looks plastic now. I liked it way better before. Granted the shineyness wasnt very famous amongst the community but now it looks worse I think. Skintones look like you have fullbody makeup applied. Really "True words"!i am sorry, but except during nighttime the skin-tones look .... "artifical" .... I also liked it a way more before! "Hear me roar!" RiviPiassa, Ammini and Desirea 3 Link to comment Share on other sites More sharing options...
Cordelia Posted June 24, 2016 Share Posted June 24, 2016 Perhaps it is now because there are ten people playing at one time, instead of two or three but...Entering a zone and taking clothes off (e.g. the beach) it takes a long time to remove each item.Also, my partner still saw me fully clothed (surprised that I didn't sink, swimming to the island).Prior to that, she took her boots off to go in the new plunge pool at the yacht but I still saw them on her and other people didn't. RiviPiassa and Girlie 2 Link to comment Share on other sites More sharing options...
Nikki Posted June 24, 2016 Share Posted June 24, 2016 Have you experimented with the shine slider under the skin option? Or is it still bad? It doesent give you the wanted results aka its not as before but it might be the new ambient lightning which is now yellow instead of blue hmmmm RiviPiassa 1 Link to comment Share on other sites More sharing options...
¸.•★Shannon★•.¸ Posted June 24, 2016 Share Posted June 24, 2016 seems SHIFT + C to hide the mouse works no more SHIFT + X for background blurring dont work SHIFT + Z to hide menu works Link to comment Share on other sites More sharing options...
Ammini Posted June 24, 2016 Share Posted June 24, 2016 It seems, that illumination/lightning effects for Love Island iceberg back side cave were also forgotten (fire, in addition for missing firewood like all others, does not illuminate walls around): Midday: http://imgur.com/y8rbWcVNight: http://imgur.com/drwznD7 RiviPiassa and Rollo 2 Link to comment Share on other sites More sharing options...
Nikki Posted June 24, 2016 Share Posted June 24, 2016 Settings dont save. The chat window always moves back on the default place when you log out and back in. Same goes with the Chatwindow Sound & Notification settings. RiviPiassa 1 Link to comment Share on other sites More sharing options...
Wendy Posted June 24, 2016 Share Posted June 24, 2016 Settings dont save. The chat window always moves back on the default place when you log out and back in. Same goes with the Chatwindow Sound & Notification settings. I don't experience the chat window issue. The others I haven't tested. RiviPiassa 1 Link to comment Share on other sites More sharing options...
Ariamma Posted June 24, 2016 Share Posted June 24, 2016 When I zoom out a bit, my eyes seem to close. RiviPiassa 1 Link to comment Share on other sites More sharing options...
Lysbeth Posted June 24, 2016 Share Posted June 24, 2016 A new one for me ^^ Chose a dark night color for a dress, turning into red when going in public rooms...or maybe i am colorblind Link to comment Share on other sites More sharing options...
Leeloo Posted June 24, 2016 Share Posted June 24, 2016 New one : Sometimes when i jump from one place to another , i lost some of my chothes or my shoesThe clickable moan and the orgasm button need around 10 seconds after being clicked to take effect Link to comment Share on other sites More sharing options...
Briana Posted June 25, 2016 Share Posted June 25, 2016 New one : Sometimes when i jump from one place to another , i lost some of my chothes or my shoesThe clickable moan and the orgasm button need around 10 seconds after being clicked to take effectOh! Cinderella you lost one of your shoes!?! it's not midnight yet"!Run run run before midnight bells ringing! Leeloo and Stéphane 2 Link to comment Share on other sites More sharing options...
MissPlaced Posted June 25, 2016 Share Posted June 25, 2016 I finally decided to give the 2.0 Beta a try, mainly because I wanted to see if my laptop could handle it. I have a budget laptop, with an Intel BayTrail M Dual-Core 2840.up to 2.58GHz CPU, with 4GB of memory and an onboard graphic card. I had to use the Simple Water settings and 3DX 2.0 runs quite happily on the medium setting, the same as 3DX. I suspect I will have to turn down the setting in crowded spaces. The good news is everything looks a lot nicer even on my little laptop The one problem I've had was when taking a screenshot. I turned off the interface on the camera, took the shot and lost the camera as well, forcing me to close the program and restart. Oh and I don't seem to be able to find the picture I took either Robi, Chilles, Leeloo and 1 other 4 Link to comment Share on other sites More sharing options...
Cordelia Posted June 25, 2016 Share Posted June 25, 2016 Remember Miss, you have to run in admin mode to take photos and they go into the Screenshots folder under 3DXChat folder. p.s. I only lose the cam if not in admin mode, otherwise it is fine Link to comment Share on other sites More sharing options...
Guest SheMania Posted June 25, 2016 Share Posted June 25, 2016 Can't get the Beta running on a Mac MacBook Pro (Retina, 13-inch, Late 2013) with Intel Iris 1536 MB, MacOS version 10.11.5. The stable version of the game runs well with PlayOnMac Version 4.2.10. Trying the beta with PlayOnMac crahes the game after i press the login button. I tried several DirectX versions and display settings, no luck. Some here reporting PlayOnMac works, some not Then i tried VMware Fusion Professional Version 7.1.3 ... i get to the same point. After pressing login the whole VM crashes and VMware collects support information. Changed a lot graphics settings there too, again no luck. So 3DX anymore for me and some other Mac users ...!? Under PlayOnMac i get a crash report i don't understand, but perhaps a developer can: Unity Player [version: Unity 5.4.0b21_b9b5b8f40e73] Unknown caused an Access Violation (0xc0000005) in module Unknown at 001b:4844e19d. Error occurred at 2016-06-25_130218. C:\Program Files\3DXChat20beta\3DXChat.exe, run by sh. 88% memory in use. 0 MB physical memory [913 MB free]. 0 MB paging file [1136 MB free]. 4094 MB user address space [4094 MB free]. Read from location 0000001c caused an access violation. Context: EDI: 0x049ab660 ESI: 0x4485bc00 EAX: 0x00000000 EBX: 0x00000001 ECX: 0x00000003 EDX: 0x4486bc1c EIP: 0x4844e19d EBP: 0x049ab568 SegCs: 0x0000001b EFlags: 0x00010202 ESP: 0x049ab4b0 SegSs: 0x00000023 Bytes at CS:EIP: 3b 48 1c 8b 0a 8b 49 04 89 4d 84 8b 55 14 8b 7d Stack: 0x049ab4b0: 00000000 00000062 049ab7ac 4485e18c ....b..........D 0x049ab4c0: 00000000 4485e264 049ab4f8 484543ba ....d..D.....CEH ... Link to comment Share on other sites More sharing options...
Heimdall Posted June 25, 2016 Share Posted June 25, 2016 Can't get the Beta running on a Mac MacBook Pro (Retina, 13-inch, Late 2013) with Intel Iris 1536 MB, MacOS version 10.11.5. The stable version of the game runs well with PlayOnMac Version 4.2.10. Trying the beta with PlayOnMac crahes the game after i press the login button. I tried several DirectX versions and display settings, no luck. Some here reporting PlayOnMac works, some not Then i tried VMware Fusion Professional Version 7.1.3 ... i get to the same point. After pressing login the whole VM crashes and VMware collects support information. Changed a lot graphics settings there too, again no luck. So 3DX anymore for me and some other Mac users ...!? Under PlayOnMac i get a crash report i don't understand, but perhaps a developer can: Unity Player [version: Unity 5.4.0b21_b9b5b8f40e73] Unknown caused an Access Violation (0xc0000005) in module Unknown at 001b:4844e19d. Error occurred at 2016-06-25_130218. C:\Program Files\3DXChat20beta\3DXChat.exe, run by sh. 88% memory in use. 0 MB physical memory [913 MB free]. 0 MB paging file [1136 MB free]. 4094 MB user address space [4094 MB free]. Read from location 0000001c caused an access violation. Context: EDI: 0x049ab660 ESI: 0x4485bc00 EAX: 0x00000000 EBX: 0x00000001 ECX: 0x00000003 EDX: 0x4486bc1c EIP: 0x4844e19d EBP: 0x049ab568 SegCs: 0x0000001b EFlags: 0x00010202 ESP: 0x049ab4b0 SegSs: 0x00000023 Bytes at CS:EIP: 3b 48 1c 8b 0a 8b 49 04 89 4d 84 8b 55 14 8b 7d Stack: 0x049ab4b0: 00000000 00000062 049ab7ac 4485e18c ....b..........D 0x049ab4c0: 00000000 4485e264 049ab4f8 484543ba ....d..D.....CEH ... test it PlayOnMac select the beta version of the game-configure-display-Offscreen select backbuffer after setting in the game and none for antialiasing for me only the water area without even working with their option I do little or accessed there water Link to comment Share on other sites More sharing options...
Ariamma Posted June 25, 2016 Share Posted June 25, 2016 Minor bug...the lenses on the glasses are only visible from one direction. See photo. Pierrousss 1 Link to comment Share on other sites More sharing options...
Guest SheMania Posted June 25, 2016 Share Posted June 25, 2016 test it PlayOnMac select the beta version of the game-configure-display-Offscreen select backbuffer after setting in the game and none for antialiasing for me only the water area without even working with their option I do little or accessed there water No luck, didn't work for me. Did you install any additional components ... like "3dx11" or so? Link to comment Share on other sites More sharing options...
Ullubu Posted June 25, 2016 Share Posted June 25, 2016 Bug: you see everyone who joins the room after you clothed, even when they get naked and everyone who is in the room before you, the way dressed they were before you joined. Everyone before you will see you clothed, even if you get naked. Link to comment Share on other sites More sharing options...
Cibacrome Posted June 26, 2016 Share Posted June 26, 2016 PlayonMac with beta 2.0 works fine for me with default install. What version osx and graphics/drivers? Link to comment Share on other sites More sharing options...
Lura Posted June 26, 2016 Share Posted June 26, 2016 Maybe it's just me, but the custom colors do not work as they did in the old version. It's like if you use them on one clothing item, they do not work on another, and when you load into a room, they go into a random color. Link to comment Share on other sites More sharing options...
Guest SayaX Posted June 26, 2016 Share Posted June 26, 2016 PlayOnMac works fine for me as well through the default install. It should do it already but PlayOnMac should install all the necessary components for you (Wine Emulator and X11). I am using the iMac 27" 5K with AMD Radeon R9 M390 graphics card running the latest version of El Capitan. The only other difference is that I am using PlayOnMac 4.2.9 not 4.2.10, although I don't think this should make much of a difference. I will try it on my MacBrook Pro 13 Retina which has the Intel Iris integrated graphics chip. Maybe it is the Intel Iris that is causing the issue. Unfortunately, the Mac isn't officially supported. However, it appears quite a few people are using a Mac so hopefully we will get some support or a native Mac client Also, is your account a Standard User or are you running as Administrator? Try changing your account to Administrator if you are running as Standard User. El Capitan now by default will make people a Standard User which may cause problems with X11. Gizmo 1 Link to comment Share on other sites More sharing options...
Guest SheMania Posted June 26, 2016 Share Posted June 26, 2016 PlayonMac with beta 2.0 works fine for me with default install. What version osx and graphics/drivers? I stated the info in my post already ... Can't get the Beta running on a Mac MacBook Pro (Retina, 13-inch, Late 2013) with Intel Iris 1536 MB, MacOS version 10.11.5. The stable version of the game runs well with PlayOnMac Version 4.2.10. Link to comment Share on other sites More sharing options...
Guest SheMania Posted June 26, 2016 Share Posted June 26, 2016 PlayOnMac works fine for me as well through the default install. It should do it already but PlayOnMac should install all the necessary components for you (Wine Emulator and X11). I am using the iMac 27" 5K with AMD Radeon R9 M390 graphics card running the latest version of El Capitan. The only other difference is that I am using PlayOnMac 4.2.9 not 4.2.10, although I don't think this should make much of a difference. I will try it on my MacBrook Pro 13 Retina which has the Intel Iris integrated graphics chip. Maybe it is the Intel Iris that is causing the issue. Unfortunately, the Mac isn't officially supported. However, it appears quite a few people are using a Mac so hopefully we will get some support or a native Mac client Also, is your account a Standard User or are you running as Administrator? Try changing your account to Administrator if you are running as Standard User. El Capitan now by default will make people a Standard User which may cause problems with X11. I'm admin user on the system. Tried different Wine version inside PlayOnMac, no luck Would be very nice if you could check if it runs on your MacBook with the Iris Graphics! Last try I can think off is to completely deinstall PlayOnMac and start from scratch. But with the bad luck i have currently, I also will destroy the working old version of 3DX Link to comment Share on other sites More sharing options...
Freesh Posted June 26, 2016 Share Posted June 26, 2016 On PlayOnLinux not work also, firstly I've tried to run it under clear wine1-8 - no luck.Then I've installed PlayOnLinux, install 3dxbeta, was same error as under clear wine.Some tests: manualy selected latest version of wine - not working. - In Display section - DirectDraw render -gdi - Error InitializeEngineGraphics failed - In Display section - Offscreen buffer - backbuffer - Game crashed while start with game dump. Link to comment Share on other sites More sharing options...
Recommended Posts