Iness Posted July 18, 2022 Share Posted July 18, 2022 Hi, I have built an underwater dome. When I try it with dome and port both above the waterline everthing works like a charm, when i lower the dome underneath water surface the port function doesn't make me land on the floor of my dome but keeps me swimming halfway. Is there a way to remedy? I tried different positions of the landing block, underneath the floor, on the floor, slightly above but always same result Link to comment Share on other sites More sharing options...
MeiLing Posted July 19, 2022 Share Posted July 19, 2022 have you moved the port? Link to comment Share on other sites More sharing options...
Veronique Posted July 19, 2022 Share Posted July 19, 2022 as far as I understood you want to build a underwater base below the water level? that wont work, as you can't build water-free compartments under the water level. A workaround would be to keep your build above water level and add a block structure with the water material on top of it. Link to comment Share on other sites More sharing options...
Iness Posted July 19, 2022 Author Share Posted July 19, 2022 ty MeiLing for your reply and yes, i moved the port deep underneath the dome, on the dome floor surface and slightly above but none work Veronique, I guess you're right, it doesn't work underwater. I tried to move my dome below the water surface with its entry point on it but that doesn't work either It's a real pity, guess it's a bug in the program because we can build waterproof constructions and sink them below the surface, so why not being able to access them ? I like your idea of putting a water block around my dome, but isn't that a bit far fetched ? :) Link to comment Share on other sites More sharing options...
MeiLing Posted July 20, 2022 Share Posted July 20, 2022 It works underwater so the problem is other Try to delete the port and to replace it by a new one Link to comment Share on other sites More sharing options...
Iness Posted August 5, 2022 Author Share Posted August 5, 2022 Vero I followed your advice but it still doesn't work. It doesn't seem like it's possible to build something underwater whether it is the game's water or one made inside a cube. I included some screenshots to show you what I did: a glass dome just below sea level surrounded by an enormous cube with material "water". That's how it looks from within the dome... Link to comment Share on other sites More sharing options...
MeiLing Posted August 5, 2022 Share Posted August 5, 2022 (edited) /me shakes her head The respawn must be out of water and on a solid area and then it works You can't have the whole room under water. But you can place 4 ports on the respawn to send your visitor under water example.world Edited August 5, 2022 by MeiLing Veronique 1 Link to comment Share on other sites More sharing options...
Veronique Posted August 7, 2022 Share Posted August 7, 2022 Thank you for the example MeiLing, I did not know this works Link to comment Share on other sites More sharing options...
SerenityWillow Posted December 7, 2022 Share Posted December 7, 2022 One way that may work for you is, lower the water level to below your build, get everything it place how you think it should be and test everything to be sure it works and when finished reset the water level and it should work. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now